Coverage rate for maintenance: 8 to 12 m²/l - Multicoat coverage: 1 to 4 m²/l
Application temperature: +5°C to +35°C
Drying: 24 h. - Setting up time before use: 3 days
Can be applied to both horizontal or vertical surfaces.
Saturates and protects all woods - Soft and Hard ; Oily and Dense.
Excellent penetration - non-film forming.
Replaces the natural oils lost from the wood - will not blacken the timber .
Transparent - Enhances the woods natural grain.
Deep penetrating, stabilises the timber - Protects against moisture ingress.
Easy maintenance - no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish.
WHERE TO USE
Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai ...
Softwoods : Pine, Spruce, Larch ...
Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals ...
Interior : flooring, paneling, stairs, doors, windows, door frames ...
Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
Direct on prepared woods
Horizontal - Vertical.
Apply a coat of D.1 - Allow to penetrate for 15-30 minutes.
Apply a second application. Allow to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
Refer to the packaging for maintenance procedure.