Preparation & Application:
- On previously coated surface: Clean with Surface Cleaner, dry, abrade to remove loose matter and key surface, remove dust using a vacuum cleaner then apply Classic Varnish
- On untreated wood: Clean with Surface Cleaner or Degreaser, dry, abrade to remove loose matter and key surface, remove dust using a vacuum cleaner. Seal/ prime with Classic Varnish thinned 20-30% with Thinners no.1, followed by 4 coats of Classic Varnish.
- Add thinners to assist application if necessary.
- Stir all products well before use.
Application method: Brush/ Roller/ Spray
Thinners & tool cleaner: Thinners no.1
Coverage: 19m_/ 1L
Minimum application temperature: 5_C/ 40_F