Peelaway Marine is specially formulated to effectively remove multiple layers of anti-foul coatings with one application
Saves time by reducing the need for repeated scraping. A light paste consistency and is easy to apply to vertical surfaces and difficult shapes
Can be applied with a brush or towel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application
1kg does up to 4m2 and 20-50% further reduction when using airless spray
Step 1 - Test Patch: It is essential to apply a test patch to the area that will be stripped. This will indicate the dwell time required and the thickness of the paste to be applied.
Step 2 - Application: Apply evenly with an airless spray, brush or trowel. Ensure that raised edges and corners are covered well and then apply a second coat to the final tested thickness. Then lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles. Work in managable areas which can be removed within the time scale.